Model |
DS-2CD6026FHWD-A |
Image Sensor |
1/1.8 inch Progressive Scan CMOS |
Signal System |
PAL/ NTSC |
Min. Illumination |
Color: 0.001 Lux @ (F1.2, AGC ON); B/W: 0.0001 Lux @ (F1.2, AGC ON) |
Shutter time |
1/1 s to 1/100,000 s |
Slow shutter |
Support |
Lens Mount |
C/CS mount |
Auto Iris |
DC drive |
Day & Night |
IR cut filter with auto switch |
Wide Dynamic Range |
120dB |
Focus |
Auto Back Focus (-A model) |
Video Compression |
H.264/ MPEG4/ MJPEG |
H.264 code profile |
Baseline Profile/ Main Profile/ High Profile |
Video bit rate |
32Kbps~16Mbps |
Audio Compression |
G.711/G.722.1/G.726/MP2L2 |
Audio bit rate |
64Kbps (G.711)/ 16Kbps (G.722.1)/ 16Kbps (G.726)/ 32-128Kbps (MP2L2) |
Triple Streams |
Yes |
Max. Image Resolution |
1920 x 1080 |
Frame Rate |
50Hz: 50fps (1920 x 1080), 50fps (1280 x 960), 50fps (1280 x 720)
60Hz: 60fps (1920 x 1080), 60fps (1280 x 960), 60fps (1280 x 720) |
Third Stream |
Independent with Main Stream and Sub Stream, up to
50Hz: 25fps (1920 x 1080); 60Hz: 30fps (1920 x 1080) |
Image Enhancement |
BLC/3D DNR/ROI/Defog/EIS |
Image Settings |
Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software or web browser |
Regional Cropping |
Support |
Picture Overlay |
LOGO picture can be overlaid on video with 128x128 24bit bmp format |
Day/Night Switch |
Auto/ Schedule/ Triggered by Alarm In |
Network |
Network Storage |
Micro SD/SDHC/SDXC card with ANR (up to 128G), NAS (Support NFS, SMB/CIFS) |
Alarm Trigger |
Line crossing detection, Intrusion detection, Defocus detection, Scene change detection, Motion detection, Face detection, Dynamic analysis, Tampering alarm, Network disconnect, IP address conflict, Storage exception |
Protocols |
TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour |
Security |
User Authentication, Watermark, IP address filtering, anonymous access, flickerless, heartbeat, video mask |
System Compatibility |
ONVIF (Profile S, Profile G), PSIA, CGI, ISAPI |
Audio Input |
1-ch 3.5 mm audio interface, Mic in/Line in. 1 built-in Microphone |
Audio Output |
1-ch 3.5mm audio interface (line level, 600 Ω) |
Communication Interface |
1 RJ45 10M/100M Ethernet port, 1 RS-485 interface and 1 RS-232 interface |
Alarm |
1 input, 1 output (up to 24VDC 1A or 110VAC 500mA) |
Video Output |
1Vp-p Composite Output (75 Ω, BNC) |
On-board storage |
Built-in Micro SD/SDHC/SDXC slot, up to 128 GB |
Reset Button |
Yes |
Audio |
Environment Noise Filtering |
Support |
Audio I/O |
Support dual audio track, stereo |
Audio Sampling Rate |
16kHz / 32kHz / 44.1kHz / 48kHz |
Behavior Analysis |
Line crossing detection, Intrusion detection, Region entrance, Region exiting, Unattended baggage, Object removal |
Line Crossing Detection |
Cross a pre-defined virtual line |
Intrusion Detection |
Enter and loiter in a pre-defined virtual region |
Region Entrance |
Enter a pre-defined virtual region from the outside place |
Region Exiting |
Exit from a pre-defined virtual region |
Unattended Baggage |
Objects left over in the pre-defined region such as the baggage, purse, dangerous materials |
Object Removal |
Objects removed from the pre-defined region, such as the exhibits on display |
Exception Detections |
Scene change detection, Sudden audio increase/ decrease detection, Audio loss detection, Defocus detection |
Recognition |
Face detection recognition |
Statistics |
Object Counting (Entrance and Exit object number is accounted and showed on screen in real time) |
Power Supply |
24VAC± 10%, 12VDC ± 10%, PoE (802.3af) |
Power Consumption |
Max. 6 W (Max. 9W with IR cut filter on) |
Dimensions |
69.8 x 58 x 145 mm |
Weight Camera |
830g |