Model |
DS-2CD2742FWD-IZS |
Image Sensor |
1/3 inch Progressive Scan CMOS |
Min. Illumination |
0.01Lux @ (F1.2,AGC ON), 0.014 Lux @ (F1.4,AGC ON), 0 Lux with IR |
Shutter time |
1/3 s to 1/10,000 s |
Slow shutter |
Support |
Lens |
2.8 - 12 mm @ F1.4, motorized lens (-Z), angle of view: 112°~33.8° |
Lens Mount |
φ14 |
Adjustment Range |
Pan: 0° - 355°, Tilt: 0° - 75°, Rotation: 0° - 355° |
Day& Night |
IR cut filter with auto switch |
Wide Dynamic Range |
120dB |
Digital noise reduction |
3D DNR |
Compression Standard |
Video Compression |
H.264/ MJPEG/ H.264+ |
H.264 code profile |
Main Profile |
Video bit rate |
32Kbps~16Mbps |
Audio Compression |
-S: G.711/G.722.1/G.726/MP2L2 |
Image |
Max. Image Resolution |
2688 x 1520 |
Frame Rate |
50Hz: 20fps (2688 x 1520), 25fps (1920 x 1080), 25fps (1280 x 720) |
60Hz: 20fps (2688 x 1520), 30fps (1920 x 1080), 30fps (1280 x 720) |
Image Enhancement |
BLC/ 3D DNR/ ROI |
Image Settings |
Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software or web browser |
Day/Night Switch |
Auto/Schedule/Triggered by Alarm In |
Network |
Network Storage |
Micro SD/SDHC/SDXC card with ANR (up to 128G), NAS (Support NFS, SMB/CIFS) |
Alarm Trigger |
Line Crossing, Intrusion Detection, Motion detection, Dynamic analysis, Tampering alarm, Network disconnect , IP address conflict, Storage exception |
Protocols |
TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour |
Security |
One-key reset, flash-prevention, dual streams, heartbeat, mirror, password protection, privacy mask, Watermark, IP address filtering, Anonymous access |
System Compatibility |
ONVIF (Profile S, Profile G), PSIA, CGI, ISAPI |
Interface |
Communication Interface |
1 RJ45 10/100Mbps Ethernet interface |
General |
Power Supply |
12VDC ± 25%, PoE (802.3af Class3) |
Power Consumption |
Max. 5.5W |
Weather Proof |
IP67 |
IR Range |
Up to 30 meters |
Dimensions |
Φ 140 x 99.9 mm |
Weight |
1000g |
NOTE |
“-S” series support 1-ch audio I/O and 1-ch alarm I/O |