Model |
DS-2CD2620F-IS |
Image Sensor |
1/3 inch Progressive Scan CMOS |
Min. Illumination |
0.01 Lux @(F1.2,AGC ON), 0 Lux with IR, 0.014 Lux @(F1.4,AGC ON), 0 Lux with IR |
Shutter time |
1/3s ~ 1/100,000s |
Lens |
2.8 - 12 mm @ F1.4,Angle of view: 113°-33.8° |
Lens Mount |
φ14 |
Day& Night |
IR cut filter with auto switch |
Wide Dynamic Range |
Digital WDR |
Digital noise reduction |
3D DNR |
Compression Standard |
Video Compression |
H.264/ MJPEG |
Video bit rate |
32Kbps~8Mbps |
Audio Compression |
G.711/G.722.1/G.726/MP2L2 |
Dual Stream |
Yes |
Image |
Max. Image Resolution |
1920 x 1080 |
Frame Rate |
50Hz: 25fps (1920 x 1080), 25fps (1280 x 960), 25fps (1280 x 720) |
60Hz: 30fps (1920 x 1080), 30fps (1280 x 960), 30fps (1280 x 720) |
Image Settings |
Saturation, brightness, contrast adjustable through client software or web browser |
BLC |
Yes, zone configurable |
ROI |
Support |
Network |
Network Storage |
NAS (Support NFS,SMB/CIFS) |
Alarm Trigger |
Line Crossing, Intrusion Detection, Motion detection, Dynamic analysis, Tampering alarm, Network disconnect, IP address conflict, Storage exception |
Protocols |
TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour |
Security |
User Authentication, Watermark, IP address filtering, anonymous access, flickerless, heartbeat, video mask |
System Compatibility |
ONVIF (Profile S, Profile G), PSIA, CGI, ISAPI |
Interface |
Communication Interface |
1 RJ45 10/100Mbps Ethernet interface |
On-board storage |
Built-in Micro SD/SDHC/SDXC slot, up to 128 GB |
Reset Button |
Yes |
General |
Power Supply |
12VDC ± 10%, PoE (802.3af) |
Power Consumption |
Max. 7.1W |
Weather Proof |
IP66 |
IR Range |
Up to 30m |
Dimensions |
95 x 105 x 258.6 mm |
Weight |
1200g |
NOTE |
“-S” series support 1-ch audio I/O and 1-ch alarm I/O |