Camera |
Image Sensor |
1/1.8 inch Progressive Scan CMOS |
Signal System |
PAL/NTSC |
Min. Illumination |
Color: 0.002 Lux @ (F1.2, AGC ON), 0 Lux with IR |
Slow shutter |
Yes |
Shutter time |
1 s to 1/100,000 s |
Lens |
2.8 to 12 mm: horizontal FOV 103.3° to 38.6°, vertical FOV 54.2° to 21.9°, diagonal FOV 124.2° to 44.3° |
Adjustment Range |
Bracket, pan: 0° to 355°, tilt: 0° to 90°, rotate: 0° to 360° |
Day& Night |
IR Cut Filter |
Wide Dynamic Range |
140dB |
Compression Standard
|
Video Compression |
H.265+/H.265/H.264+/H.264/MJPEG |
H.264 code profile |
Baseline Profile/Main Profile/High Profile |
Video bit rate |
32Kbps~16Mbps |
Image
|
Max. Image Resolution |
1920 x 1080 |
Image Enhancement |
BLC, HLC, 3D DNR, Defog, EIS |
BLC |
Support |
HLC |
Support |
Smart Defog |
Support |
EIS |
Support |
3D DNR |
Support |
Picture Overlay |
LOGO picture can be overlaid on video with 128 × 128 24bit bmp format |
Day/Night Switch |
Day/Night/Auto/Schedule/Triggered by Alarm In/ Triggered by video |
Network
|
Network Storage |
microSD/SDHC/SDXC card (128G), local storage and NAS (NFS,SMB/CIFS), ANR |
Protocols |
TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour |
Intelligent
|
Behavior analysis |
Line crossing detection, intrusion detection, region entrance detection, region exiting detection, unattended baggage detection, object removal detection |
Interface
|
Communication Interface: |
1 RJ45 10M/100M/1000M Ethernet port
1 RS-485 interface (half duplex, HIKVISION, Pelco-P, Pelco-D, self-adaptive) |
Alarm |
2 inputs, 2 outputs (up to 24VDC 1A or 110VAC 500mA) |
Video Output |
1Vp-p Composite Output (75 Ω, BNC) |
On-board storage |
Built-in Micro SD/SDHC/SDXC slot, up to 128 GB |
Reset Button |
Yes |
Smart Feature-set
|
Behavior Analysis |
Line crossing detection, Intrusion detection, Region entrance, Region exiting, Unattended baggage, Object removal |
Line Crossing Detection |
Cross a pre-defined virtual line |
Intrusion Detection |
Enter and loiter in a pre-defined virtual region |
Region Entrance |
Enter a pre-defined virtual region from the outside place |
Region Exiting |
Exit from a pre-defined virtual region |
Unattended Baggage |
Objects left over in the pre-defined region such as the baggage, purse, dangerous materials |
Object Removal |
Objects removed from the pre-defined region, such as the exhibits on display |
Exception Detections |
Scene change detection, defocus detection |
General
|
IR Range |
up to 50m |
Operation Condition |
-30°C to 60°C |
Power Consumption |
12 VDC, 1.2 A, max. 14 W; PoE (802.3at, 42.5 V to 57 V), 0.4 A to 0.3 A |
Impact Protection |
IK10 |
Weather Proof |
IP67 |
Dimensions |
Φ140 × 351 mm |
Weight |
approx. 2.5 kg |